The Biggest CDMA & GSM Forum
 
PortalHomeFAQSearchMemberlistUsergroupsRegisterLog inFacebook
  :: Best Prices With Fast Service ::    Iphone Australia Networks      Iphone U.S.A Networks      Iphone U.K Networks      Iphone France Networks      Iphone Canada Networks      Iphone Swizerland Networks Unlock Now FRIENDUNLOCKER

Share | .
 

 MartechBox III New product

View previous topic View next topic Go down 
AuthorMessage
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: MartechBox III New product   Thu Apr 03, 2014 8:46 am

On 02.04.2014 we introduce our new product - Martech Box III.

Why a new Box ? You can read here:

About | Martech Box3 Help

What's new in Box III, which is not on Clip so far:

- Nissan LCN / Opel Corsa Touch & Connect (within the activation OMAP5948) original code reading
- full support (read, write, erase) of M35080 3/6/V6/VP/D80/D160 (under the tab of programmer)
- new user interface - easier and faster selection of models, more features
- read / erase / write Serial SPI memories likeMX25L160 , W25X32 and F-RAM eg. FM25L04
- RNS 315 original code reading the without the use of expander (procedures work independently without control computer)
- JTAG programmer (in development)
- in many cases, support K / L - Line without external power supply 12V
- K / L support in different voltage ranges from 1 to 15 V (programmable)
- 10 universal I / O lines with programmable logic from 1 to 5 V
- UART and RS232 (separate outputs for RS232 - a standard PC or signal level from -9V ..+ 9V )
- UART in logic from 0 to 15V - max voltage from 1V to 15V
- RS232 with the range of -12V .. +12V
- work on USB power + the ability to work on external power
- possibility to supply external circuits from the box
- Vreg - programmable voltage from 0.5 .. 5V (max voltage dependent on the performance of the computer USB)
- hardware and software support for most protocols OBD ( ALDL , OBD -I, OBD -1.5 , OBD-II , EOBD , EoBD2 , JOBD , ADR , SAE J1850 PWM , SAE J1850 VPW , ISO 9142-2)
- device is fully expandable, on the request of customers also
- programmable current protection outputs, IREG (sum of all outputs IO1 .. I08 + RX + TX)
- analog inputs - ADC-A, ADC-B


Box III specifications:

- diagnostic DB25 connector (inputs, outputs, TX232, RX232, CAN L, CAN H, K-Line, L-Line, Vreg, ADC-A, ADC-B)
- USB connector
- 9V external power supply connector
- 4 led diodes (BUSY/ERROR, CONNECTION, RX, TX)
- firmware update on the fly (in background, changes came after software close)
- drivers installations directly from windows update xp/vista/win7/win8/win8.1

For all Martech Clip users we have possibility to replace Clip into Box III (with moving activations from old to new device).
More details: shop@martech.pl.

Regards
Martech Team
Martech



@
Back to top Go down
View user profile http://www.mobitechnician.com
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Box III as Virtual Device-Martech AMS3   Sat Apr 19, 2014 10:25 pm

Martech AMS3 - Box III as Virtual Device

Virtual Device - the ability to emulate various interfaces with the specified parameters.
In Tool bookmark you can find:

- TX (K-line),RX(L-line), (range of 0..9V..+12V)
- RX (K-line),TX(L-line), (range of 0..9V..+12V)
- K-line, (range of 0..9V..+12V)
- L-line, (range of 0..9V..+12V)
- UART1, (range of 0..+5V)
- UART1 - inverted, (range of 0..+5V)
- M-Bus (range of 0..+5V)
- RS232 (range of -9V..+9V)


After defining and memorizing (the Save button saves the settings in the device), you can close AMS3.
From that moment every time you open com port with previously selected parameters.
The transmission on the selected protocols running stable even at high speeds - 3Mb/s.
To sum up - from now on we can use the Box III as a universal interface to other programs.

As a reminder, Box III supports:
- M35080 ( 3/6/V6/VP )
- M35080 ( D80-DOWQ )
- M35080 ( D160-DOWQ )

All types can be read, write and erase - most importantly in a very short time.

Added models:
- Honda, 2YA1 MF721R0 BOSE, 39101-S1A-G110-M1, 24C02 by Alpine
- Ford, 6000 CD RDS EON, 98AP-18C815-AC by Visteon
- KIA, B02002, OK588 66 8C0, 24c02
- VW, RCD-300, 1K0 035 186AF, 24C32 by Grundig
- Opel, Touch & Conect MC Corsa EU, 7 612 830 112, 13 362 758 by Bosch (tylko Box III)

Best regards,
Martech Team.
Martech


@
Back to top Go down
View user profile
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Martech update Box III V0.1.1.1570 -Clip V0.0.9.64   Wed May 21, 2014 6:03 pm

Martech update Box III V0.1.1.1570 -Clip V0.0.9.64

Latest Update :

- 22DC710/65B by Philips - general calculator
- Opel, CD 40 Opera, 24C32 by Grundig
- Honda, DEH-M6227ZH, 39101-S5S-B510-M1, 93C46 (Reverse) by Pioneer
- Ford, HSRNS (NX), 7 612 330 732, BM2T-18K931-BA by Blaupunkt
- KDC-DNX5260BT, Y39-6122-71, 24C64 by Kenwood
- Honda, MF721R0, 39101-S5S-B510-M1, 24C02 by Alpine
- VW, RCD 300, 7 643 222 360, 1K0 035 186J, 95640 by Blaupunkt
- Traffic Pro, BE-4720 by Becker


How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
MartechTeam - YouTube

Best Regards
Martech Team
Martech

@
Back to top Go down
View user profile
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Martech update Box III V0.1.1.1574 -Clip V0.0.9.65   Fri May 23, 2014 11:53 pm

Martech update Box III V0.1.1.1574 -Clip V0.0.9.65

Latest Update :

- Ford, 4050 RDS EON, YM21-18K876-FD, ST92F120V107 by Visteon - M series
- Ford, 4050NE, YM21-18K876-FC, ST92F120V107 by Visteon - M series
- Ford, 5000NE RDS, YM21-18K876-JB, ST92F120V107 by Visteon - M series
- Ford, 6000NE RDS, 7M5 035 195B, YM21-18K876-KC, ST92F120V107 by Visteon - M series
- Audi, RNS-E Basic EU, 4B0 035 192P, MBM29XL12DF by AISIN AW


How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
MartechTeam - YouTube

Best Regards

Martech Team
Martech

@
Back to top Go down
View user profile
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: RNS 315 All versions supported BOX III   Tue Jun 10, 2014 11:20 am

Martech AMS update 0.1.1.1634 Box III

Latest Update :

- VW, Gamma 3, 357 035 186G, 24c02 by Philips
- VW, Gamma 3, 357 035 186, 24c04 by Philips
- VW, Gamma 3, 357 035 186D, 24c04 by Philips
- Nissan, LCN 2 A.0, 7 612 033 023 by Bosch
- VW, RNS 315 EU, 3C0 035 279B by Technisat
- VW, RNS 315 EU, 3C0 035 279G by Technisat
- VW, RNS 315 EU, 3C0 035 279L by Technisat
- VW, RNS 315 EU, 3C0 035 279N by Technisat
- VW, RNS 315 EU, 3C0 035 279P by Technisat
- VW, RNS 315 EU, 3C0 035 279Q by Technisat
- VW, RNS 315 EU, 3C8 035 279 by Technisat
- VW, RNS 315 EU, 3C8 035 279A by Technisat
- VW, RNS 315 EU, 3C8 035 279B by Technisat
- VW, RNS 315 EU, 3C8 035 279C by Technisat
- VW, RNS 315 EU, 3C8 035 279D by Technisat
- Skoda, RNS 315 EU, 3T0 035 192 by Technisat
- Skoda, RNS 315 EU, 3T0 035 192G by Technisat
- Skoda, RNS 315 EU, 3T0 035 192J by Technisat
- Skoda, RNS 315 EU, 3T0 035 192K by Technisat
- Skoda, RNS 315 EU, 3T0 035 192L by Technisat
- Skoda, RNS 315 EU, 3T0 035 192M by Technisat
- Skoda, RNS 315 EU, 3T0 035 193B by Technisat
- Skoda, RNS 315 EU, 3T0 035 193C by Technisat
- Skoda, RNS 315 EU, 5JA 035 192 by Technisat
- Seat, RNS 315 EU, 5P0 035 191J by Technisat
- Seat, RNS 315 EU, 5P0 035 191K by Technisat
- Seat, RNS 315 EU, 5P0 035 191N by Technisat
- Seat, RNS 315 EU, 5P0 035 191P by Technisat
- Seat, RNS 315 EU, 6JA 035 192 by Technisat
- Seat, RNS 315 EU, 6JA 035 192A by Technisat
- Seat, RNS 315 EU, 6JA 035 192B by Technisat
- Seat, RNS 315 EU, 6JA 035 192C by Technisat
- Opel, Touch & Conect MC Corsa EU, 7 612 830 172, 13 431 892 by Bosch


More models, options in this activation will come very soon.
Best Regards,

Martech Team

Martech

@
Back to top Go down
View user profile
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Martech AMS3 0.1.1.1777 - CAN scanner / COM terminal   Thu Jul 17, 2014 12:53 am

Martech AMS3 0.1.1.1777 - CAN scanner / COM terminal


Latest update:

- CAN scaner added under Tools bookmark
( you can scan can protocol on various devices)
CAN speed might be calculated automatically, other functions like Prescaler, SJW, BS1, BS2 might be choosen by user.

- COM terminal added with many options
( you can send commands also to device connected)

- new drivers added
- small bugs fixed
- box firmware update ( faster USB connection )


CAN scaner (scaner, not CAN data player) and terminal is free for all users.
Waiting for feedbacks from users.


Martech Team
Martech

@
Back to top Go down
View user profile
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Martech AMS update 0.1.1.1801 Box III - Clip V0.0.9.68   Tue Jul 29, 2014 10:13 am

Martech AMS update 0.1.1.1801 Box III - Clip V0.0.9.68

Latest Update :
- Nissan, AGC-0071RF, 28185 BH30A, 24C64 by Daewoo
- Renault, Auditorium Tronic, MH9RN92S, 8 200 089 153
- Porsche, CDR210, BE-2282, 24C04 by Becker
- Porsche, CDR22, BE-4467, 24C02 by Becker
- VW, RCD 310 EU, 1Z0 035 161G, 24LC32 by Delphi
- Renault, RENRDW 142-00, 24C64 by VDO
- Suzuki, SUKNR 301-09, 39101-65JB, 24C32 by VDO

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
https://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
http://www.martech.pl

_________________
MARTECH TEAM

@
Back to top Go down
View user profile
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Emulators - new activation from Martech Team   Thu Aug 07, 2014 12:49 am

Martech AMS update 0.1.1.1865

Emulators - new activation from Martech Team operates only on the Box III.
The main feature is the ability to run for bench testing: dashboards, LCD displays, instrument clusters, navigations.

First version allows to connect "on the table":
- Renault dashboard (various versions)
- Renault Scenic dashboard
- Renault Laguna III dashboard
- Peugeot - Citroen LCD display

New versions and devices will be gradually added.

In order to add new devices we had developped and added to Box III:
- CAN, K-Line and UART scanner
- i2c terminal
- frequency meter
- other tools in the future

In case of problems with scanning, there is possibility to help remotely or sending unit to us to adding.

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe



Best Regards
Martech Team
Martech

@
Back to top Go down
View user profile
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Martech BOX III v0.1.1.1919 - Clip V0.0.9.70 update   Sat Aug 23, 2014 1:07 am

Martech BOX III v0.1.1.1919 - Clip V0.0.9.70 update

Latest Update :

- Beta 4, 9.18124, 893 035 152 by Grundig
- Opel, CAR-300(D), 7 645 852 520, 68HC05B16 by Blaupunkt
- Renault, Carminat Navigation, BE-7409 by Becker
- Honda, CQ-EH1465Z, 39175-SDN-L120-M2, 93c86 by Panasonic
- Volvo, FM12 Truck, 28322131, 24C32 by Delphi
- Opel, LCD TID ( 8/10 char ) emulator
- MGR Rover, MG Stereo CD5404 MP3X, XQE000940PMA, 24C32 by VDO
- Nissan, PN-2419F, 93C46 by Clarion
- Nissan, PP-2514L, 28188 CF000, 93C46 by Clarion
- Renault, RENMCC 102-00, 8200 338 527, 24C32 by VDO
- VW, ROME NAV 55E, 7 612 300 306 by Blaupunkt
- SC-303D (C), 9.18209 by Grundig
- SC-303D (C), 9.18287 by Grundig
- SC-303D (C), 9.18288 by Grundig
- Opel, SC803B by Grundig
- Opel, SC804 by Grundig
- Opel, SC804B, 9.18146 by Grundig
- VW, SV HUI 224/5GD, 1JD 035 119B, 24C04 by VDO
- WKC-2201 RDS, 9.18350-81 by Grundig
- WKC-3804 REVERSE, 9.18195 by Grundig
- WKC-3842 by Grundig
- WKC-3851 RDS, 9.18151 by Grundig
- WKC-3870 RDS INFOMAT, 9.18205 by Grundig
- WKC-3880 RDS INFOMAT, 9.18204 by Grundig
- WKC-4870 RDS A by Grundig
- WKC-4870 RDS by Grundig
- WKC-4870, 9.18145 by Grundig
- WKC-4871 RDS INFOMAT, 9.18228 by Grundig
- Porsche, WKC-5000 RDS by Grundig
- Porsche, WKC-5000, 9.18159 by Grundig
- WKC-5201 RDS INFOMAT, 9.18331-8151 by Grundig
- WKC-5290 RDS INFOMAT by Grundig
- WKC-5400 by Grundig
- Porsche, WKC-5500 RDS, 9.18160 by Grundig
- Porsche, WKC-5500 RDS by Grundig
- WKC-6400 RDS INFOMAT by Grundig
- WKC-6500 RDS INFOMAT, 9.18291 by Grundig


How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe


Best Regards
Martech Team
Martech

@
Back to top Go down
View user profile http://www.mobitechnician.com
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Martech BOX III v0.1.1.2001    Tue Sep 09, 2014 10:56 am

Martech BOX III v0.1.1.2001

Last update allows you to:
- Bench test the BMW radios with DISABLED information on the screen
BMW Disabled | Martech Box3 Help

- Bench test Renault Tuner and Update List radios (display and joystick
emulation)


A sample video can be seen here:
http://*********/YUGk_t2LFpM?list=UU...JHIo-Qxd5GL6ug

Connection is very simple:
Renault LCD | Martech Box3 Help

Best Regards
Martech Team
Martech

@
Back to top Go down
View user profile http://www.mobitechnician.com
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Renesas Boot ID/Pass Finder   Mon Sep 29, 2014 2:33 am

Martech BOX III v0.1.1.2075 Clip 0.0.9.72
Renesas Boot ID/Pass Finder activation works only on Box III and it allows to read/write boot password secured chips.
Suported procesors:

M30245FCGP
M30262F4GP
M30624FGAFP
M30624FGAGP
M30624FGFP
M30624FGGP
M30624FGLFP
M30624FGLGP
M30624FGMFP
M30624FGMGP
M30624FGNFP
M30624FGNGP
M30624FGPFP
M30624FGPGP

Description Renesas | Martech Box3 Help

It works on boot versions 2.01 and 4.01 (2.00 is not supported yet).

Supported models:
-Webasto AIR TOP 2000 ST

Latest Update :

- Seat, Aura CD, 9.18431-8151, 1M0 035 186D, 24LC16 by Grundig
- VW, Gamma, 7 648 231 380, 1J0 035 188E, 95160 by Blaupunkt
- Ford, HSRNS (NX), CD340, 7 612 300 527, 8S7T-18K931-AE by Blaupunkt
- New ****** MP68, 7 648 498 310, 95128 by Blaupunkt
- Chrysler, P05091180AB A, 24c64
- VW, RCD 510 Prem-8, 28372938, 1K0 035 180AF, S29GL64 by Delphi
- VW, RCD-200, 600035152E, 24C16 by Famar
- Renault, RENRDW 100-10, FD0504500238600, 24C32 by VDO
- Renault, SAT, 22DC665/62, 24C02 by Philips
- Skoda, Stream CD MP3, 1Z0 035 161A, MC9S12 by Visteon

A sample video can be seen here:
https://www.youtube.com/watch?featur...&v=uwYB_KEykXM

Connection is very simple:
Renesas | Martech Box3 Help

Best Regards
Martech Team

''
Back to top Go down
View user profile
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Martech Box III v - RNS 315 without SPI protection   Fri Oct 03, 2014 2:38 am

Martech Box III v - RNS 315 without SPI protection

Today we are releasing new version of tool with RNS 315 support without SPI protection needs.
Decode process:
- it's the same like previous, just without point 1
( RNS 315 | Martech Box3 Help )
- we use Mode 3 after model select
- we need to connect one more wire from Box III to radio board
( http://help.martech.pl/sites/pliki/files/rns315.png )

Mode 3 works on latest firmware version 0500 and on older also.

If you want to unsubscribe from this subscription - reply to this email with your forum nickname.

Best Regards
Martech Team

''
Back to top Go down
View user profile http://www.mobitechnician.com
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Martech BOX III v0.1.2.2081 - Clip V0.0.9.73 update   Fri Oct 10, 2014 12:04 pm

Martech BOX III v0.1.2.2081 - Clip V0.0.9.73 update

Latest Update :


- Suzuki, DY-3E44S-SL, 39101-59J80, 93LC56 by Mitsubishi
- EC4290 CD by Grundig - general calculator
- Seat, SE 251, 7 640 288 366, 6JA 035 186, 95128 by Bosch
- Ford, Single CD - KW2000, 8V4T-18C815-AE, TMS470R1VF288 by FoMoCo - V series
- VW, ULVWMP3, 7E0 035 516A, 24C16 by Technisat



How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

How to update Clip? Run martech_rcd_ams.exe or download and get latest version via setup:
http://martech.pl/support/Public/setup_rcdx.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
MartechTeam - YouTube

Best Regards
Martech Team

''
Back to top Go down
View user profile http://www.mobitechnician.com
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: ST10 Flasher - new activation for Martech Box III   Tue Oct 28, 2014 10:20 pm

Martech BOX III v0.1.2.2159

ST10 Flasher - new activation for Box III

Box III received another feature - the ability to fully program the ST10 series processors.
First version allows to read, erase and write:
- ST10F269 ( internal flash )
- ST10F276 ( internal flash )
- ST10F276 ( AM29F400BT - ext. flash )

Programming is carried out in circuit - without desoldering processors.
This also applies ext. flash connected to the CPU ( eg. AM400 in RNS510 navigation).
Operation time for read, write, and erase it is a dozen of seconds.

Examples of the use of activation:
- repair not working touch panel in RNS 510
- repair software faults in the RNS 510 ( gateway error while flashing )
- repair hang on radio logo Mercedes NTG 2.5 navigation
- repair car clusters / computers

Connections to the system are very simple:
- Mercedes NTG 2.5 | Martech Box3 Help
- RNS 510 / RNS 810 | Martech Box3 Help

In the coming updates you can expect support for programming BMW CCC and Opel CD70.

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe



Best Regards
Martech Team

''
Back to top Go down
View user profile http://www.mobitechnician.com
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Ford CAN code reader - new activation for Box III   Fri Nov 14, 2014 9:19 am

Martech BOX III v0.1.2.2225

Ford CAN code reader - new activation for Box III.

Activation allows you to:
- read the original radio code
- read, reset, and change the VIN stored in the radio

The reading process takes a while and is done by CAN (radio must support this protocol).
Procedure can be performed on bench or in the car:
Ford MS-Can | Martech Box3 Help

Supported models:
- radios based on NEC D70F3357, TMS470, MC9s12, ST92 (KW2000, GGDS) with V or M prefix
- navigation modules produced by Visteon and Bosch (C307 / C214 Nav module, FX - LSRNS, NX - HSRNS)

NOTE: activation reads the original factory code.
If it happens that the code does not match, it means that it has been changed and you should read the processor / memory depending on the device.

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe



Best Regards
Martech Team
Martech
Back to top Go down
View user profile http://www.mobitechnician.com
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Martech update Box III V0.1.2.2227   Fri Nov 21, 2014 12:16 am

Martech update Box III V0.1.2.2227

Latest Update :

- 6000 CD 7S7T-18C815-AB Visteon Ford
- CD345-MCA PREMIUM BS7T-18C815-AF Sony Ford
- CD307-CD6-ISLAND-KW2000 7M5T-18C939-FF Sony Ford
- CD3XX 7M5T-18C939-JE Sony Ford
- CD-KW2000 7H5T-18C815-BA Sony Ford
- CD-KW2000 6S61-18C816-AJ Sony Ford
- 6000 CD 8S61-18C815-AG Sony Ford
- CD MP3 7S7T-18C939-CE Visteon Ford
- 6000 CD 8S7F-18C844-EA Visteon Ford
- SINGLE CD - GGDS 8C1T-18C815-AC Sony Ford
- 6000 CD 8M5T-18C815-DC Sony Ford
- CD-KW2000 7M5T-18C939-EC Sony Ford
- Single CD - GGDS 8C1T-18C815-AD FoMoCo Ford
- C214 C307 7S7F-18C821-DA Sony Ford
- CD-KW2000 8MT5-18C815-DB Visteon Ford
- 6000 CD 5S5T-18C815-DB Sony Ford
- 6000 CD 8C1T-18C815-AC Sony Ford
- 6000 CD 8M5T-18c815-CD Sony Ford
- 6000 CD BS7T-18C939-AB Sony Ford
- 6000 CD 8S61-18C815-AB Sony Ford


mobitechnician
Back to top Go down
View user profile http://www.mobitechnician.com
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Martech update Box III V0.1.2.2237   Tue Nov 25, 2014 9:32 am

Martech update Box III V0.1.2.2237

Latest Update :

- Ford, 6000 CD, 5S7T-18C815-CG by Sony
- Ford, 6000 CD, 6S61-18C815-AG by Sony
- Ford, 6000 CD, 8M5T-14C044 AB by Sony
- Ford, 6000 CD, 8M5T-18C815-DB by Sony
- Ford, CD MP3, 6C3F-18C939-AA by Visteon
- Ford, CD MP3, 8C1T- 18C815-AB by Visteon
- Ford, CD307-CDI-ISLAND-KW2000, 7M5T-18C939-EG by Sony
- Ford, CDX - FS214CF, 7M5T-18C939-CF by Sony
- Ford, CDX 5F611N, 7S7F-18C821-EA by Denso
- Ford, KW2000, 8V4T-18C815-AC by Sony

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Best Regards
Martech Team
Back to top Go down
View user profile http://www.mobitechnician.com
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Martech update Box III V0.1.2.2269-CLIP update 0.0.9.76   Thu Dec 18, 2014 2:03 am

Martech update Box III V0.1.2.2269, CLIP update 0.0.9.76

Latest Update :

- Ford, 6000 CD, 7M5T-14C044-BA by Sony
- Ford, 6000 CD, 7S7T-18C939-BF by Sony
- Renault, EL-1255L-A, 280 600000 4R, 24C16 by Clarion
- KDC-5090B, 24C01 by Kenwood
- Mitsubishi, Navigation System, MZ312960, 93C46 by Mitsubishi
- VW, RNS 315 EU, 3C8 035 279J by Technisat
- VW, RNS 315 EU, 3C8 035 279L by Technisat
- VW, RNS 315 EU, 3C8 035 279R by Technisat
- **************, Traffic Pro, BE-4745, 24C04 by Becker
Back to top Go down
View user profile
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: PLEASE INIT - Cleaner Martech update Box III V0.1.2.2284   Mon Dec 22, 2014 3:06 pm

Martech update Box III V0.1.2.2284

PLEASE INIT - Cleaner - Christmas gift for Security Repairer activation
users.

Our unique solution allows to get working wide range of Clarion radios like
PN-2805F, PN(PP)-300x etc.
Until now, the only solution was to use the immo emulator.

This function is needed when:
- after using Off 'Secure' you see PLEASE INIT on radio screen

Description of use:
http://help.martech.pl/?q=node/113

This function is available for free to any Box III and Security Repairer
activation users.

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
https://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
Back to top Go down
View user profile
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Martech update Box III 0.1.2.2292 - Clip update v0.0.978   Tue Jan 20, 2015 11:06 am

Latest Update :

- Ford, 6000 CD, 8M5T-18C815-AC by Sony
- Fiat, CD1023R, 24C01 by Autosound
- Opel, CDR-2005 MK1, 24 469 307, 24C16 by VDO
- KIA, D1 CDP, 96140-1H000, 24C64 by Continental
- KVT-717 dvd, 24C08 by Kenwood
- Land Rover, RC479, A1832, 24C16 by Famar
- VW, RCD-200, 600035152G, 28064107, 24C16 by Famar

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
https://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
Back to top Go down
View user profile http://www.mobitechnician.com
warrior
Trail Moderator
Trail Moderator


Posts : 2495
Thanks : 8634
THANKS : 74
Join date : 2013-09-09

PostSubject: Martech AMS3 v0.1.2.2304 - ST10F280 added   Tue Feb 03, 2015 8:23 am

''

From today you can:
- read/erase/write internal flash of ST10F280

You can see example how to connect to ECU IAW5SF3.M1/2 from Grande Punto
II:
- IAW 5SF3.M1/2 -ST10F280 | Martech Box3 Help

Other models added:
- 2250 CD TESB05 BP7301 7 647 300 316 Blaupunkt Citroen
- Beta 95160 7 649 236 360 1J0 035 153 Blaupunkt
- KDC-DDX42BT 24C16 Kenwood
- H-C394-AA EUR BV4T-18C939-AA Ford
- HSRNS (NX) 7 612 330 935 BM2T-18K931-EH Blaupunkt Ford
- HSRNS (NX) 7 612 360 522 8S7T-18K931 AC Blaupunkt Ford
- Radio Navigation System 2 24C64 7 612 002 022 7L6 035 191N Blaupunkt

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtube channel for videos:
https://www.youtube.com/user/MartechTeam?feature=watch


Best regards,
Martech Team
Back to top Go down
View user profile
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Motorola Protect Service-Martech Update New update for Martech Box III V0.1.2.2457   Thu Apr 23, 2015 11:23 am

Motorola Protect Service

New activation from Martech Team allows reading and writing secured
before reading Motorola sysytems of MC9S12 / HC912 series.

Depending on the system, the following functions are available:
- Reading ( eprom, flash, verification )
- Writing ( eprom, flash, verification )
- Temporary removal protection ( skip protect )
- Complete removal of protection ( disabled protect )

In addition, the series XEA, XEG, XEP, XEQ, XES, XET:
- P-Flash - flash ( read, write, verification )
- D-Flash - flash data ( read, write, verification )
D-Flash can be divided into the D-Flash and EEPROM (emulation) - is responsible for that "Partiton".
The division is at 256 bytes per0x100, EEPROM takes 8 times more of D-flash of its size.

Some of supported chips:
- MC9S12XHZ512, MC9S12XHZ384, MC9S12XHZ256
- MC9S12XET512, MC9S12XET256, MC9S12XES384
- MC9S12XEQ512, MC9S12XEQ384, MC9S12XEP768
- MC9S12XEP100, MC9S12XEG384, MC9S12XEG256
- MC9S12XEG128, MC9S12XEA256, MC9S12XEA128
- MC9S12XDT512, MC9S12XDT384, MC9S12XDT256
- MC9S12XDQ256, MC9S12XDP512, MC9S12XDP256
- MC9S12XDG128, MC9S12XD64, MC9S12XD256
- MC9S12XD128, MC9S12XB256, MC9S12XB128
- MC9S12XA512, MC9S12XA256, MC9S12XA128
- MC9S12H256, MC9S12H128, MC9S12DT512
- MC9S12DT256, MC9S12DT128, MC9S12DP512
- MC9S12DJ512, MC9S12DJ256, MC9S12DJ128
- MC9S12DG256, MC9S12DG128, MC9S12A512
- MC9S12A256, MC68HC912DT128A(C/P)
- MC68HC912DG128A(C/P)
- MC68HC912D60, MC68HC912D60A

Occuring in devices BMW-cas2-cas3-cas3+-Cas4,Mini,Mercedes,Ford,Nisan,Opel etc....

Additionally:
- minor repairs and changes introduced
- Vreg measurement option added
- ST10 series processors communication repaired
- buffer cleaning option

Models added:
-22DC461/62L Blaupunkt Renault 7700 433 072
-Bose Matsu****a Honda 39101-S1A-G010-M1 
-LSRNS(FX) Blaupunkt Ford 7612 330 792 
-RCD510 USB RVC Delphi VW 5ND 035 190A
-RCD510 Delphi VW 56D 035 190A
-Stilo CD (M series) Visteon Fiat 2FCF-18C838-BE

New innovative solutions from Martech Team soon !!!

If you want to unsubscribe from this subscription - reply to this email
with your forum nickname.

Best Regards
Martech Team
Martech
email:shop@martech.pl
Back to top Go down
View user profile http://www.mobitechnician.com
dragonworld
Diamond Member
avatar

Posts : 2672
Thanks : 9879
THANKS : 24
Join date : 2012-09-06
Age : 29
Location : with admin

PostSubject: Martech Box III - update V0.1.2.2470   Fri May 08, 2015 6:32 pm

Martech Box III - update V0.1.2.2470

Latest Update: 

- 28115136R BP8061 VDO Renault 7 648 061 592 281151362RT
- AGC 1220 RF Anatel Daewoo 281156707R ARA-1230RF-A
- BA420 Low Grundig Ford 7 354 765 220 28211816
- Beta 5 Grundig VW 9.18355 - 81 1J0 035 152E 
- CDR 500(d) Delco Opel 90 566 821 GM0500
- HSRNS (NX) Blaupunkt Ford BS7T-8K931-ED
- LCN20.A Bosh Nissan 7 612 033 024 259153HN0A BP0020
- Melody Technisat Skoda 1Z0 035 152E SKZAZ1D
- PN-3001P Clarion Nissan 28185 9U10A
- Stream CD MP3 Visteon Skoda VP4SBF-18C815-AH, 1Z0 035 161B

- new schematics on help.martech.pl (MC9s12, ST10)
- minor changes and bugs corrected

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
https://www.youtube.com/user/MartechTeam?feature=watch

Best Regards
Martech Team
Martech
Back to top Go down
View user profile http://www.mobitechnician.com
Friendunlocker
Product Manager
Product Manager


Posts : 86
Thanks : 3383
THANKS : 1
Join date : 2014-08-24

PostSubject: Connect Alfa Romeo S29GL128 add support Martech BOX III   Sat Jun 20, 2015 9:08 am

Martech Box III - update V0.1.2.2510

Latest Update:
-323MY10SB08 Bosch Fiat 7 640 387 316
-AXOR 7 Bosch ************** 7 620 000 032 815 BP0009
-BB717PO Alpine Honda 39541-SWA-E010-M1
-BE-4377 Becker Ferrari
-Beta 5 Grundig VW 43B0 035 152
-Connect Magnetii Marelli Alfa Romeo 156101564
-Connect Magnetii Marelli Alfa Romeo 156101518
-F199 CD GHT1400 Grundig Fiat 9.18453-8351 GHS6300
-FKDD MBYI A Delphi Volvo 28239676
-FX-M2016ZRN Pioneer Saab PDH004
-HSRNS (NX) Blaupunkt Ford 7 612 330 937 BM2T-18K931-EK
-LAN521WR1 Renault 2811 53868R
-LCN EU Bosch Nissan 7 612 830 094
-M4G47602D CQ-EH1461Z Panasonic Honda 39175-SDA-A120-M2
-Navi RNS Blaupunkt Audi 7 612 001 358 4D0 035 192J

How to update Box III? Run martech_ams3.exe or download:
http://box3.martech.pl/martech_ams3.exe

Check supported models and functions in demo version:
http://box3.martech.pl/martech_ams3.exe

Check our Youtobe channel for videos:
https://www.youtube.com/user/MartechTeam?feature=watch
Best Regards
Martech Team
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: MartechBox III New product   

Back to top Go down
 

MartechBox III New product

View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
MobiTechnician :: Hard/Software-Products (Non-Offcial Support) :: Martech Products-
Created by Service Team
Registered trademark of MobiTechnician Mobile Solutions