Successfully I727 IMEI Repair Done With Octupus Box



@

GT-i9300 repair baseband OK,Thanks Octopus Box Team
INFO : 5/13/2013 2:38:51 PM > Platform: Samsung Android
INFO : 5/13/2013 2:38:51 PM > Selected port: COM1
INFO : 5/13/2013 2:38:51 PM > Selected model: GT-I9300
WARN : 5/13/2013 2:38:51 PM > To put GT-I9300 phone into download mode you have to perform the following steps:
WARN : 5/13/2013 2:38:51 PM > 1. Reconnect phone battery.
WARN : 5/13/2013 2:38:51 PM > 2. Press and hold "Volume - " + "Home" + "Power" buttons.
WARN : 5/13/2013 2:38:51 PM > 3. When phone turns on press "Volume+" button.
INFO : 5/13/2013 2:38:53 PM > Repairing EFS...
INFO : 5/13/2013 2:38:53 PM > Searching for a phone. Please wait...
INFO : 5/13/2013 2:38:53 PM > Phone found.
INFO : 5/13/2013 2:38:57 PM > EFS Repair successfully
INFO : 5/13/2013 2:44:26 PM > -----------------------------------------------------------------------------------
INFO : 5/13/2013 2:44:26 PM > Platform: Samsung Android
INFO : 5/13/2013 2:44:26 PM > Selected port: COM116
INFO : 5/13/2013 2:44:26 PM > Selected model: GT-I9300
INFO : 5/13/2013 2:44:26 PM > Reading info, please wait...
ERROR : 5/13/2013 2:44:26 PM > Proper android device not found. Make shure that "USB debug" option on the device is turned on.
Log file "C:\Program Files\GsmServer\OctopusSamsung\LOG\13-05-2013_14-31-29.log"


@

Samsung anycall SPH-W8700 Unlock Done Octoplus




@

GT-S6312 IMEI SUCCESSFULLY REPAIRED WITH FULL NETWORK.

Welcome to Octoplus/Octopus Box Samsung software version 1.2.1
-----------------------------------------------------------------------------------
To connect GT-S6312 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
Selected firmware file: GT-S6312_for_Repair_IMEI .oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S6312 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing OEMSBL section...
OEMSBL section has been written successfully.
Writing APPSBL section...
APPSBL section has been written successfully.
Writing QCSBL section...
QCSBL section has been written successfully.
Writing CFG_DATA section...
CFG_DATA section has been written successfully.
Writing APPS section...
APPS section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing PERSIST section...
PERSIST section has been written successfully.
Writing FAT section...
FAT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM21
Selected model: GT-S6312
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Repairing network. Please wait, it can take some time...
Repairing network failed.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: GT-S6312
Detected phone model: GT-S6312
Firmware compiled date: Thu Feb 28 15:31:26 KST 2013
Phone SN: RF1D39K8RQA
Android version: 4.1.2 (JZO54K)
Repairing network. Please wait, it can take some time...
Network is successfully repaired.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: GT-S6312
Mode: Normal
Phone model: GT-S6312
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Feb 28 2013
Firmware released time: 16:04:28
Incorrect IMEI
SW Version: 76XXS-USUSKOLYM-2035
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: GT-S6312
Mode: Normal
Phone model: GT-S6312
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Feb 28 2013
Firmware released time: 16:04:28
SW Version: 76XXS-USUSKOLYM-2035
Old IMEI: 004400-15-202000-0
New IMEI: 358564XXXXXXXXXX
Firmware compiled date: Thu Feb 28 15:31:26 KST 2013
Phone SN: RF1D39K8RQA
Android version: 4.1.2 (JZO54K)
Deactivating MSL...
MSL deactivate successfully
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Feb 28 2013
Firmware released time: 16:04:28
SW Version: 76XXS-USUSKOLYM-2035
Repairing IMEI ...
New IMEI successfully written.
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: GT-S6312
Mode: Normal
Phone model: GT-S6312
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Feb 28 2013
Firmware released time: 16:04:28
Phone IMEI: 358564-03-086430-3
SW Version: 76XXS-USUSKOLYM-2035
Old IMEI B: 358XXXXXXXX
New IMEI B: 358565-03-086430-0
Firmware compiled date: Thu Feb 28 15:31:26 KST 2013
Android version: 4.1.2 (JZO54K)
Deactivating MSL...
MSL deactivate successfully
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Firmware compiled date: Jan 10 2013
Firmware compiled time: 05:00:00
Firmware released date: Feb 28 2013
Firmware released time: 16:04:28
Phone IMEI: 358
SW Version: 76XXS-USUSKOLYM-2035
Repairing IMEI ...
New IMEI successfully written.
Please, restart the phone to apply changes

@

SPH-W2700 Unlock Done With My Favourite Box



@

GT-S7562 IMEI REPAIRED SUCCESS.

Welcome to Octoplus/Octopus Box Samsung software version 1.2.3
-----------------------------------------------------------------------------------
To connect GT-S7562 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM23
Selected model: GT-S7562
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM23
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: GT-S7562
Mode: Normal
Phone model:
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM23
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: 707SC
Mode: Normal
Phone model:
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM23
Mode: Emergency
-----------------------------------------------------------------------------------
To connect GT-S7562 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: GT-S7562
Mode: Normal
Phone model: GT-S7562
Firmware compiled date: Sep 27 2012
Firmware compiled time: 01:00:00
Firmware released date: Oct 26 2012
Firmware released time: 14:02:27
Incorrect IMEI
SW Version: 76XXU-USNSKOLYM-2055
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: GT-S7562
Mode: Normal
Phone model: GT-S7562
Firmware compiled date: Sep 27 2012
Firmware compiled time: 01:00:00
Firmware released date: Oct 26 2012
Firmware released time: 14:02:27
SW Version: 76XXU-USNSKOLYM-2055
Old IMEI: 004400-15-202000-0
New IMEI: 355355-XXXXXXXX
Firmware compiled date: Fri Oct 26 17:42:09 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76I)
Deactivating MSL...
MSL deactivate successfully
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Firmware compiled date: Sep 27 2012
Firmware compiled time: 01:00:00
Firmware released date: Oct 26 2012
Firmware released time: 14:02:27
SW Version: 76XXU-USNSKOLYM-2055
Repairing IMEI ...
New IMEI successfully written.
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM22
Selected model: GT-S7562
Mode: Normal
Phone model: GT-S7562
Firmware compiled date: Sep 27 2012
Firmware compiled time: 01:00:00
Firmware released date: Oct 26 2012
Firmware released time: 14:02:27
Incorrect IMEI
SW Version: 76XXU-USNSKOLYM-2055
Old IMEI B: 004400-15-202000-0
New IMEI B: 355356XXXXXXX
Firmware compiled date: Fri Oct 26 17:42:09 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76I)
Deactivating MSL...
MSL deactivate successfully
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Firmware compiled date: Sep 27 2012
Firmware compiled time: 01:00:00
Firmware released date: Oct 26 2012
Firmware released time: 14:02:27
Phone IMEI: 355355XXXXXX
SW Version: 76XXU-USNSKOLYM-2055
Repairing IMEI ...
New IMEI successfully written.
Please, restart the phone to apply changes

@

GT-C3530 Unlocking



@

I9070 Imei Repair Done

Found phone on
Firmware write started.
Writing Kernel section...
Kernel section has been written successfully.
Writing Modem section...
Modem section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHEFS section...
CACHEFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM3
Selected model: GT-I9070
Searching for a phone. Please wait...
Detect Model Name: GT-I9070
S/W version: I9070VJLD1
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM3
Selected model: GT-I9070
Searching for a phone. Please wait...
Detect Model Name: GT-I9070
S/W version: I9070VJLD1
Old IMEI: Unknown
New IMEI: 358810-04-990620-9
Writing new IMEI. Please wait...
Deactivating MSL...
MSL deactivate successfully
New IMEI successfully written.
Please, restart the phone to apply changes

@

Samsung GT-C3310 flashing done....
Welcome to Octoplus/Octopus Box Samsung software version 1.2.3
Selected firmware file: C3310XXLA4_OXELA2.oct
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3310
Selected port: USB
Phone must be OFF, and battary must be fully charged
Please, connect USB cable and reconnect battery.
Connecting...
Phone found.
Sending loaders...
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Writing firmware...
Erasing Full Flash...
Full Flash erase successfully.
Writing "C3310XXLA4_psi"...
Writing "C3310XXLA4_psi" done!
Writing "C3310XXLA4_slb"...
Writing "C3310XXLA4_slb" done!
Writing "C3310XXLA4_BSY part 0"...
Writing "C3310XXLA4_BSY" done!
Writing "C3310XXLA4_BSY part 1"...
Writing "C3310XXLA4_BSY" done!
Writing "C3310XXLA4_CDS"...
Writing "C3310XXLA4_CDS" done!
Writing "C3310OXELA2_CSC"...
Writing "C3310OXELA2_CSC" done!
Firmware Write successfully.

N7000B IMEI REPAIRED SUCCESSFULLY

Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000B
Searching for a phone. Please wait...
ADB server killed.
Phone found.
Firmware compiled date: Wed Jul 11 14:20:18 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)

-----------------------------------------------------------------------------------

Platform: Samsung Android
Selected port: COM1
Selected model: GT-N7000B
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 11 14:20:18 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
Old IMEI: Unknown
New IMEI: 350000-00-00000-0
Erasing old IMEI. It can take some time. Please wait...
Phone will restart now, plaese wait 1-2 minutes
Searching for a phone. Please wait...
Phone found.
Writing new IMEI. Please wait...
New IMEI successfully written.
Please, restart the phone to apply changes

Successful Flash Repair S5230w
Code:

Welcome to Octoplus/Octopus Box Samsung software version 1.2.3
-----------------------------------------------------------------------------------
Selected firmware file: S5230WXEIL1.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-S5230W phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Camera" + "Power" buttons.
Searching for a phone. Please wait...
Found phone on COM61
Firmware write started.
Writing BOOT\BCMBOOT section...
Writing BOOT\BOOT2 section...
Writing BOOT\PATCH_DSP section...
Writing BOOT\SYSPARM_DEP section...
Writing BOOT\SYSPARM_IND section...
Phone will restart now. Please don't disconnect cable!
Writing APPS section...
APPS section has been written successfully.
Writing RSRC1 section...
RSRC1 section has been written successfully.
Writing RSRC2 section...
RSRC2 section has been written successfully.
Writing FactoryFS section...
Formating FactoryFS partition...
Formating successfully compleated
FactoryFS section has been written successfully.
Phone will restart now
Firmware writing successfully completed.

Platform: Samsung In****on
Selected model: GT-S5292
Selected port: USB
Phone must be OFF, and battary must be fully charged
Please, connect USB cable and reconnect battery.
Connecting...
Phone found.
Sending loaders...
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Writing firmware...
Erasing Full Flash...
Full Flash erase successfully.
Writing "POLLUX_DS_CDS_catfish"...
Writing "POLLUX_DS_CDS_catfish" done!
Writing "POLLUX_DS_BSY_catfish"...
Writing "POLLUX_DS_BSY_catfish" done!
Writing "POLLUX_DS_BSY_catfish"...
Writing "POLLUX_DS_BSY_catfish" done!
Writing "GT_S5292_CHN"...
Writing "GT_S5292_CHN" done!
Firmware Write successfully.
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-S5292
Selected port: COM7
Phone must be ON.
Searching for a phone. Please wait...
Found phone on COM7
Reading info...
UniqueNumber : 66789BC4903920B5
SW Version : S5292ZCMA2
Phone IMEI A: 354675050562447
Phone IMEI B: 354701050562441
Deactivating MSL...
MSL deactivate successfully
Unlocking phone...
Phone is successfully unlocked
Please insert card into phone, if phone is locked, then type #0111*
00000000#

Samsung E1205T Unlock Done
Code:

Welcome to Octoplus/Octopus Box Samsung software version 1.2.5
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E1205T
Selected port: COM32
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35202105041049
SW Version: E1205TWNL
Phone SN : RV1C43N42C
Reading codes...
Freeze lock: 32235500
Net lock: 00000000
Sim lock: 00000000
Phone lock: 00000000
Sp lock: 00000000

Unlock and Repair Imei Samsung galaxy TV s5367



@

Samsung A847R Successfully Unlock Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
-----------------------------------------------------------------------------------
To connect SGH-A847R phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Type *#782872#.
3. Press confirm button.
4. Type *#7465625# and leave appeared message on phone screen.
5. Connect USB cable and select Diagnostics COM port.
6. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM58
Selected model: SGH-A847R
Detected phone model: SGH-A847R
Mode: Normal
SW Version: UXJK4
HW Version: REV0.1
Phone IMEI: 355832-04-006740-4
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM20
Selected model: SGH-A847R
Mode: Normal
Phone model: SGH-A847
Firmware compiled date: Aug 12 2010
Firmware compiled time: 07:00:00
Firmware released date: Nov 17 2010
Firmware released time: 02:13:50
Phone IMEI: 355832-04-006740-4
Bluetooth MAC: E2:FB:48:37:5A:3C
SW Version: SBAM6290A-KPVMZL-2.6.014023_1S
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM20
Selected model: SGH-A847
Mode: Normal
Phone model: SGH-A847
Firmware compiled date: Aug 12 2010
Firmware compiled time: 07:00:00
Firmware released date: Nov 17 2010
Firmware released time: 02:13:50
Phone IMEI: 355832-04-006740-4
Bluetooth MAC: E2:FB:48:37:5A:3C
SW Version: SBAM6290A-KPVMZL-2.6.014023_1S
Reading phone unlock codes. It can take some time, please wait...
FREEZE unlock code: 05906139
NCK unlock code: 71648203
NSCK unlock code: 00000000
SPCK unlock code: 00000000
CPCK unlock code: 00000000
Work time: 0:01:14

@

Successfully Repaired I757m Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
-----------------------------------------------------------------------------------
To connect SGH-I757M phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: I757MUGLH2_OYCLH2
_BMC_Canada_Bell_Android_4.0.4.oct
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SGH-I757M
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM74
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM18
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM74
Selected model: SGH-I757M
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM74
Mode: Emergency
Please switch your phone to the download mode and connect it to a
PC.
To put SGH-I757M phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Firmware writing successfully completed.

@

Successfully Repair IMEI and S/N Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
-----------------------------------------------------------------------------------
To connect GT-I9300 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Reboot phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM18
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM17
Selected model: GT-I9300
Port is busy
Searching for a phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM17
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM17
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
Old IMEI: Unknown
New IMEI: 351869-05-000009-3
Erasing old IMEI. It can take some time. Please wait...
Creating NVM backup
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\NVDATA-GT-I9300-12-08-2013_22-56-33-.nvm file
Old IMEI was erased successfully.
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#9090# number.
4. Set speed to 115200.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Phone connected successfully
Deactivating MSL...
MSL deactivate successfully
Writing new phone IMEI...
New IMEI successfully written.
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM18
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
Repairing Serial Number. It can take some time. Please wait...
Phone will restart now
SN repaired successfully.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
Phone SN: R31C50JBCGK
Android version: 4.0.4 (IMM76D)

@

Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
Selected firmware file: C3303KDX.oct
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-C3303K
Selected port: USB
Please, press "volume up" and "lock" connect phone to USB without
battery.
Connecting...
Phone found.
Chipset version : 0A
SCROM version : 33
Sending loaders...
Preloader send successfully
Conecting to pipes...
Successfully conecte to pipes.
Writing firmware...
Writing Firmware
Writing partition LCDACT ...
Erasing block...
Block erase successfully.
Writing block...
Partition LCDACT write successfully.
Writing partition MAIN ...
Erasing block...
Block erase successfully.
Writing block...
Partition MAIN write successfully.
Writing partition DSP ...
Erasing block...
Block erase successfully.
Writing block...
Partition DSP write successfully.
Writing partition ROOT ...
Erasing block...
Block erase successfully.
Writing block...
Partition ROOT write successfully.
Writing partition BOOT ...
Erasing block...
Block erase successfully.
Writing block...
Partition BOOT write successfully.
Writing partition TFS ...
Partition TFS write successfully.
Writing partition CSC ...
Partition CSC write successfully.
Firmware Write successfully.

@

Samsung Swift GT-E3220

Welcome to Octoplus/Octopus Box Samsung software version 1.3.2
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E2220
Selected port: COM18
Baud rate: 115200
Plase, connect phone to UART cable, insert battery and press shortly
power button
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35821404382823
SW Version: E2220WBLC
Bluetooth MAC: 28987B702073
Phone SN : RV1C44HMV2
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E2220
Selected port: COM18
Baud rate: 115200
Plase, connect phone to UART cable, insert battery and press shortly
power button
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35821404382823
SW Version: E2220WBLC
Bluetooth MAC: 28987B702073
Phone SN : RV1C44HMV2
Reading codes...
FREZEE : 15604500
NET LOCK : 53769050
Subset LOCK : 000000000
SP LOCK : 000000000
CP LOCK : 000000000
SIM LOCK : 4184867194
Activa LOCK : 000000000
Phone LOCK : 4195067296
Reading codes successfully completed.

@

Log file "C:\Program Files\Octoplus\Octoplus_Samsung\LOG\10-09-2013_15-00-08.log" created (9/10/2013 3:00:12 PM).
INFO : 9/10/2013 3:00:12 PM > Set up system language English (file: English.ini)
INFO : 9/10/2013 3:00:12 PM > Welcome to Octoplus/Octopus Box Samsung software version 1.3.2
INFO : 9/10/2013 3:03:01 PM > Selected firmware file: GT-I9020_for_Repair_IMEI.oct
WARN : 9/10/2013 3:03:04 PM > Please switch your phone to the download mode and connect it to a PC.
WARN : 9/10/2013 3:03:04 PM > To put GT-I9020 phone into download mode you have to perform the following steps:
WARN : 9/10/2013 3:03:04 PM > 1. Reconnect phone battery.
WARN : 9/10/2013 3:03:04 PM > 2. Press and hold "Volume + " + "Volume -" buttons.
WARN : 9/10/2013 3:03:04 PM > 3. Insert usb cable.
INFO : 9/10/2013 3:03:11 PM > Found phone on
INFO : 9/10/2013 3:03:11 PM > Firmware write started.
INFO : 9/10/2013 3:03:11 PM > Writing IPBL section...
INFO : 9/10/2013 3:03:14 PM > IPBL section has been written successfully.
INFO : 9/10/2013 3:03:14 PM > Writing BOOT section...
INFO : 9/10/2013 3:03:16 PM > BOOT section has been written successfully.
INFO : 9/10/2013 3:03:16 PM > Writing SYSTEM section...
INFO : 9/10/2013 3:04:15 PM > SYSTEM section has been written successfully.
INFO : 9/10/2013 3:04:15 PM > Writing RECOVERY section...
INFO : 9/10/2013 3:04:18 PM > RECOVERY section has been written successfully.
INFO : 9/10/2013 3:04:18 PM > Writing USERDATA section...
INFO : 9/10/2013 3:04:25 PM > USERDATA section has been written successfully.
INFO : 9/10/2013 3:04:25 PM > Writing RADIO section...
INFO : 9/10/2013 3:04:30 PM > RADIO section has been written successfully.
INFO : 9/10/2013 3:04:30 PM > Firmware writing successfully completed.
INFO : 9/10/2013 3:05:20 PM > -----------------------------------------------------------------------------------
INFO : 9/10/2013 3:05:20 PM > To connect GT-I9023 phone you have to perform the following steps:
INFO : 9/10/2013 3:05:20 PM > 1. Disconnect USB cable from phone.
INFO : 9/10/2013 3:05:20 PM > 2. Go to Menu->Settings->Applications->Development.
INFO : 9/10/2013 3:05:20 PM > 3. Turn on "USB Debugging" option.
INFO : 9/10/2013 3:05:20 PM > 4. When the message appears press "Yes".
INFO : 9/10/2013 3:05:20 PM > 5. Connect USB cable to the phone.
INFO : 9/10/2013 3:05:20 PM > 6. Press "Read Info" in software.
INFO : 9/10/2013 3:05:26 PM > Selected firmware file: I9023 XEN I9023XXKD1.oct
WARN : 9/10/2013 3:06:02 PM > Please switch your phone to the download mode and connect it to a PC.
WARN : 9/10/2013 3:06:02 PM > To put GT-I9023 phone into download mode you have to perform the following steps:
WARN : 9/10/2013 3:06:02 PM > 1. Reconnect phone battery.
WARN : 9/10/2013 3:06:02 PM > 2. Press and hold "Volume + " + "Volume -" buttons.
WARN : 9/10/2013 3:06:02 PM > 3. Insert usb cable.
INFO : 9/10/2013 3:06:02 PM > Found phone on
INFO : 9/10/2013 3:06:02 PM > Firmware write started.
INFO : 9/10/2013 3:06:02 PM > Writing IPBL section...
INFO : 9/10/2013 3:06:04 PM > IPBL section has been written successfully.
INFO : 9/10/2013 3:06:04 PM > Writing BOOT section...
INFO : 9/10/2013 3:06:07 PM > BOOT section has been written successfully.
INFO : 9/10/2013 3:06:07 PM > Writing RECOVERY section...
INFO : 9/10/2013 3:06:09 PM > RECOVERY section has been written successfully.
INFO : 9/10/2013 3:06:09 PM > Writing SYSTEM section...
INFO : 9/10/2013 3:07:13 PM > SYSTEM section has been written successfully.
INFO : 9/10/2013 3:07:13 PM > Writing USERDATA section...
INFO : 9/10/2013 3:07:19 PM > USERDATA section has been written successfully.
INFO : 9/10/2013 3:07:19 PM > Firmware writing successfully completed.
Log file "C:\Program Files\Octoplus\Octoplus_Samsung\LOG\10-09-2013_15-00-08.log" closed (9/10/2013 3:18:34 PM).

@

Welcome to Octoplus/Octopus Box Samsung software version 1.3.3
-----------------------------------------------------------------------------------
To connect SGH-T599 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "Modem" value.
7. Set "USB" radio button to "PDA" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM15
Selected model: SGH-T599
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Thu Feb 14 18:28:12 KST 2013
Phone SN: R21D54JWWDN
Android version: 4.1.2 (JZO54K)
Unlocking phone...
Reading data from phone...
Data read successfully.
Please conect phone to BOX via UART cable.
Searching for a phone. Please wait...
Phone found.
Unlocking phone. It can take some time. Please wait...
Please insert card into phone, if phone is locked, then type 00000000
Phone is successfully unlocked

@

Only with Octopus Box Samsung T599 Welcome to Octoplus/Octopus Box Samsung software version 1.3.3
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SGH-T599
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Fri Apr 12 02:23:38 KST 2013
Phone SN: R21D65WWPJJ
Android version: 4.1.2 (JZO54K)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM18
Selected model: SGH-T599
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Fri Apr 12 02:23:38 KST 2013
Phone SN: R21D65WWPJJ
Android version: 4.1.2 (JZO54K)
Unlocking phone...
Reading data from phone...
Data read successfully.
Please conect phone to BOX via UART cable.
Searching for a phone. Please wait...
Phone found.
Unlocking phone. It can take some time. Please wait...
Please insert card into phone, if phone is locked, then type 00000000
Phone is successfully unlocked

@

C 3312 successfully unlocked

Welcome to Octoplus/Octopus Box Samsung software version 1.3.4
Selected firmware file: C3312XXLA5_OXELA3.oct
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM67
Baud rate: 115200
Phone must be OFF, and battary must be fully charged
Please, connect the UART cable, Reconnect the battery, press Power
button
Connecting...
Port is busy
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: USB
Phone must be OFF, and battary must be fully charged
Please, connect USB cable and reconnect battery.
Connecting...
Phone found.
Sending loaders...
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Writing firmware...
Erasing Full Flash...
Full Flash erase successfully.
Writing "C3312XXLA5_psi"...
Writing "C3312XXLA5_psi" done!
Writing "C3312XXLA5_slb"...
Writing "C3312XXLA5_slb" done!
Writing "C3312XXLA5_BSY part 0"...
Writing "C3312XXLA5_BSY" done!
Writing "C3312XXLA5_BSY part 1"...
Writing "C3312XXLA5_BSY" done!
Writing "C3312XXLA5_CDS"...
Writing "C3312XXLA5_CDS" done!
Writing "C3312OXELA3_CSC"...
Writing "C3312OXELA3_CSC" done!
Firmware Write successfully.
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM67
Phone must be ON.
Searching for a phone. Please wait...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM68
Phone must be ON.
Searching for a phone. Please wait...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM67
Phone must be ON.
Searching for a phone. Please wait...
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM21
Phone must be ON.
Searching for a phone. Please wait...
Found phone on COM21
Reading info...
UniqueNumber : 27370001361710
SW Version : C3312XXLA5
Phone IMEI A:
Phone IMEI B: -----------------------------------------------------------------------------------
Platform: Samsung In****on
Selected model: GT-C3312
Selected port: COM21
Phone must be ON.
Searching for a phone. Please wait...
Found phone on COM21
Reading info...
UniqueNumber : 27370001361710
SW Version : C3312XXLA5
Phone IMEI A:
Phone IMEI B:
Deactivating MSL...
MSL deactivate successfully
Unlocking phone...
Phone is successfully unlocked
Please insert card into phone, if phone is locked, then type #0111*
00000000#

I9192 Unlocked! Platform: Samsung Android
Selected port: COM149
Selected model: GT-I9192
Port is busy
Mode: Emergency
Unlock for GT-I9192 phone in emergency mode can’t be done
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM149
Selected model: GT-I9192
Mode: Normal
Phone model: GT-I9192
Firmware compiled date: Jun 11 2013
Firmware compiled time: 20:00:00
Firmware released date: Aug 19 2013
Firmware released time: 22:14:14
Phone IMEI: 357963-05-452006-7
SW Version: M8930B-AAAATAZM-4.5.211107
Unlocking phone...
Creating NVM backup
Reading NVM done!
Firmware compiled date: Mon Aug 19 21:05:51 KST 2013
Phone SN: R21D8CVZNVA
Android version: 4.2.2 (JDQ39)
Cheking Root
Deactivating MSL...
MSL deactivate successfully
Phone will restart now. Please don't disconnect cable!
Firmware compiled date: Jun 11 2013
Firmware compiled time: 20:00:00
Firmware released date: Aug 19 2013
Firmware released time: 22:14:14
Incorrect IMEI
SW Version: M8930B-AAAATAZM-4.5.211107
Found phone on COM149
Repairing NVM for GT-I9192 phone...
Phone is successfully unlocked
Please, restart the phone to apply changes

@

E1205T read codes Platform: Samsung Swift
Selected model: GT-E1205T
Selected port: COM117
Baud rate: 921600
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35587705159430
SW Version: E1205TJVL
Phone SN : R21D20NZW6
Reading codes...
Freeze lock: 37391320
Net lock: 00000000
Sim lock: 00000000
Phone lock: 00000000
Sp lock: 00000000

@