All about sharp cables
GX10-GX10i-GX20:

only COM cable or USB to COM converter cable.is the same for data/unlock/flash.

pinouts:

KEY PAD
-------
1 2 3 4 5 6 7 8


9 10 11 12 13 14 15 16

pin 1 gnd (black)
pin 2 link to 10
pin 5 + (red) ext power +3..5V
pin 5 link to 12
pin 6 rx (white)
pin 7 tx (blue) open drain, connect 10k Resistor to pin5!
pin 9 link to 14



above PINOUTS are 100% working and TESTED by many of my FRIENDS....
even this pinouts are working with MAX232


GX15-GX17-GX25:

only USB cable,not COM.for data and unlock use sipmle original USB cable.
FOR FLASH YOU NEED NEC 3G CABLE OR USB CABLE WITH CHARGING FUNCTION(see pic1).
caution:usually you can't use flash cable for unlock.


GX30-GX30i-TM100:

you can use USB and COM cable for data BUT ONLY COM CABLE WITH EXTERNAL POWER FOR FLASH AND UNLOCK(see pic2).


3G SEMC PHONES (802-902 etc) :

you can use USB and COM cable for data BUT ONLY COM CABLE OR USB TO COM
CONVERTER CABLE FOR FLASH AND UNLOCK.(see the pic3 for VIDEO CONNECTOR
pinouts).the most famoys in this case is the 4 in 1 CRUISER cable.
YOU CAN USE ALSO GX30 CABLE(connected to the charging connector
ofcourse) but in this case speed will be too slow(115200).Also SPST
work's better with that cable.



since now every new thread or post(except this thread) about sharp cable will be deleted without any warning.











__________________