Solution how to revive or unbrick hard brick Cherry Mobile Flare

STEP A.

1.Run EMMC_DownLoad_Version 1.2.3. Download Here
Click SELPATH select “BP Firmware” Download Here Folder.
2.Connect phoneto PC
3.On your PC, Check Device Manager for Qualcomm HS-Usb Diagnostics 9006 Com Port Number.
4.Then Look for Qualcomm HS-Usb Diagnostics 9006 ,input the Com port Number in EMMC Download Box. Click Download Button.
5.Wait until Till successful. Remove battery.

Click for Image
Image 1
Image 2

NOTE: Make sure your com port is correct

STEP B

1)First Run QUALFAST . Download Here Click SELPATH, select AP firmware Download Here Part 1 Part 2 (“Stock JB Rom” Folder), Check Format Card & Userdata
2) Go to Fastboot Mode Screen or Green Screen Mode -Power plus Vol Up.
3) Click OK to start download then connect phone to PC
4) Wait until download is successful. Remove battery.

Click for Image
Image 1
Image 2

You have a new running CM Flare on JB 4.1.2

Next step will be

STEP C
1) IMEI & Wi-Fi MAC Address Writing

STEP D
1) ROOTING