Admin
Admin
Posts : 3981
Thanks : 18795
THANKS : 36
Join date : 2012-09-02
Age : 35
Location : INDIA, TAMILNADU
 |  Subject: Dell model XCD28 pattern lock removed  Sat Dec 22, 2012 10:33 pm | |
| Dell model XCD28 pattern lock removed with the help of rickywyatt solution here is the procedure
if phone will go only in Boot Mode and not going in Recovery+ Hard Rest Mode Than it will work Possible it will work other Huawei Andriod sets (:
first thing if you want downloaded recovery then do so
* download this rickywyatt.rar (rickywyatt.rar) rickywyatt.rar
* ok take out the battery and wait 5 secs then put it back in the press the vol + and the power button it should boot only to the green android logo and the red light stays on
* extract it to your c:\ then install the drives if needed then click install-recovery-windows.bat once done the fone will reboot
* switch phone off the hold the vol- button and press the power button it will boot into recovery
next ....
* in recovery click wipe data/factory reset
* click apply sdcard:update.zip
* once complete click reboot system now |
|
Admin
Admin
Posts : 3981
Thanks : 18795
THANKS : 36
Join date : 2012-09-02
Age : 35
Location : INDIA, TAMILNADU
| | Subject: How to upgrade the Android 2.1 (Eclair) to 2.2 (Froyo) on a Dell XCD28: Sat Dec 22, 2012 10:40 pm | |
| How to upgrade the Android 2.1 (Eclair) to 2.2 (Froyo) on a Dell XCD28:
Warning: Attempt at your own risk, although the method is fully tested
but there can be unexpected results if you fail to follow the
instructions properly.
Note:
1. In terms of hardware Dell XCD28 is none other but ZTE Racer and all ROMs available for a racer work on XCD28.
2. All your data shall be erased in the process. Contacts can be
exported to SD card and after up gradation you can import them back to
your phone from sd card.
Method:
Files required:
1. UniversalAndroot_1.6.1.apk
2. RecoveryManager_v0.36b.apk
3. recoverysu850 -
4. 2.2 Froyo ROM and Update
Steps:
1. Export all your contacts to SD card. Open contacts----Select
Menu----Select Import/Export----Select Export to SD card (if prompted to
choose contacts from a list the select all by clicking on menu and then
click done).
2. Note down the IMEI no. of your phone by removing the battery or by dialing *#06# on your phone.
3. Connect your xcd28 to computer and open you sd card. Now create a new
folder, name it as Androroot and copy all the downloaded files to it.
4. Disconnect you xcd28 from computer.
5. Open Filer on phone and open the folder Androroot.
6. Install UniversalAndroot_1.6.1 and open it.
7. Click on Root
8. Once rooting is complete.
9. Go back to androroot and install recovery manager and open it.
10. Provide superuser rights by clicking on allow.
11. Click on recovery and further install recovery.
12. Select the image file on recovery install popup and then confirm by clicking on OK.
13. Click on Reboot in recovery and confirm by clicking OK.
14. Phone will restart in recovery mode.
15. In this mode you can navigate in the menu list by using only volume
increase/decrease keys and select a menu by pressing the power on/off
button. Touch screen input is not operational in recovery mode.
16. Press these keys in sequence – volume decrease key—volume increase
key--- volume decrease key. You’ll see a message on screen Back menu
button enable (this enables your power button for selecting a menu
option). Note: If you press volume increase—volume decrease—volume
increase then it will disable the power button (back menu button).
17. Go to backup and restore option by pressing volume increase key and select by pressing the power button.
18. Select backup by pressing the power button.
19. This will backup your original phone configuration to sd card. The
backup is stored in /clockworkmod/backup folder on SD card. This backup
can be used to restore back to original firmware if you face any issue
with the upgrade.
20. Once you see the backup complete option on your phone screen,
navigate to wipe data/factory re option by using the volume keys and
select it by pressing the power button.
21. Navigate to Yes – delete all u and select it by pressing power button.
22. When you see Data wipe complete on your screen, navigate to choose zip from sd card and select by pressing power button.
23. Navigate to androroot folder and select by pressing power button.
24. Select Android 2.2.zip using power button.
25. Navigate to Yes-Install Android and press power button.
26. Wait while android is being installed.
27. Once you see the message Install from SD card complete then repeat
from step no. 22 but this time select the file update.zip in the
androroot folder.
28. Once this installation is complete select go back and then select reboot system now.
29. Phone restarts in Android Froyo. At first boot it may take upto 5-10 mins.
30. If at first start you find your phone is in locked mode, not to worry we can unlock it for free.
31. Visit the site – Free Instant Unlock Codes for Alcatel, Huawei Modems & ZTE Mobile Phones on your computer.
Enter
your IMEI (noted in step 2), then select the service as ZTE and select
ZTE racer in Models. Then fill in the verification code as displayed on
the screen and click on order.
|
|
Iphone Australia Networks 
Iphone U.S.A Networks 
Iphone U.K Networks 
Iphone France Networks 
Iphone Canada Networks 
Iphone Swizerland Networks Unlock Now FRIENDUNLOCKER
