The Biggest CDMA & GSM Forum
 
PortalHomeSearchLatest imagesRegisterLog inFacebook
  :: Best Prices With Fast Service ::    Iphone Australia Networks      Iphone U.S.A Networks      Iphone U.K Networks      Iphone France Networks      Iphone Canada Networks      Iphone Swizerland Networks Unlock Now FRIENDUNLOCKER

MobiTechnician :: Hard/Software-Products (Non-Offcial Support) :: Advance-BoxShare
 

 ATF JTAG - Box Init Failed - Solution

View previous topic View next topic Go down 
AuthorMessage
dragonworld
Diamond Member
dragonworld

Posts : 2672
Thanks : 13841
THANKS : 24
Join date : 2012-09-06
Age : 34
Location : with admin

ATF JTAG - Box Init Failed - Solution Empty
PostSubject: ATF JTAG - Box Init Failed - Solution   ATF JTAG - Box Init Failed - Solution Icon_minitimeTue Mar 04, 2014 4:11 pm
ATF JTAG - Box Init Failed - Solution

Follow steps to fix your problem

1. Make sure NO OTHER BOXES ARE CONNECTED TO USB PORT

2. Make sure ONLY 1 ATF BOX IS CONNECTED TO USB PORT

3. Go to "Product Support" ---> "Box Tools" ---> click "Restore EEPROM"


ATF JTAG - Box Init Failed - Solution ATF_RESTORE_EEPROM


4. Disconnect ATF Box from USB Port

5. Close ATF Software (AdvanceBox.exe)

6. Connect ATF Box to USB Port

7. Run ATF Software (AdvanceBox.exe)

8. Wait until USB Drivers are installed... Then close ATF Software

9. DO NOT ACTIVATE JTAG USING ATF Software!!!

*** Make sure you Internet Connection before proceeding to the Next Step...

10. Run ATFJ.exe (ATF JTAG Software 1.06 or higher...)


If your problem is still not solved, read Step 9... Repeat 1 to 10 again.
Back to top Go down
http://www.mobitechnician.com
 

ATF JTAG - Box Init Failed - Solution

View previous topic View next topic Back to top 
Page 1 of 1

 Similar topics

-
» F.A.Q - Frequently Asked Questions
» EASY-JTAG Update 1.0.101.0 - First in the world solution. Tegra 2/3 partitions.
» EASY-JTAG Update 1.0.101.0 - First in the world solution. Tegra 2/3 partitions.
» 29/07/13 |FuriousGold| PACK5 | QCOM SMART TOOL v1.0.0.8743 + JTAG REPAIR SOLUTION !!!
» 29/07/13 |FuriousGold| PACK5 | QCOM SMART TOOL v1.0.0.8743 + JTAG REPAIR SOLUTION !!!

Permissions in this forum:You cannot reply to topics in this forum
MobiTechnician :: Hard/Software-Products (Non-Offcial Support) :: Advance-Box-
Created by Service Team
Registered trademark of MobiTechnician Mobile Solutions