The Biggest CDMA & GSM Forum
PortalHomeSearchLatest imagesRegisterLog inFacebook
  :: Best Prices With Fast Service ::    Iphone Australia Networks      Iphone U.S.A Networks      Iphone U.K Networks      Iphone France Networks      Iphone Canada Networks      Iphone Swizerland Networks Unlock Now FRIENDUNLOCKER


 Firmware Update Steps For Samsung S5302

View previous topic View next topic Go down 
Diamond Member

Posts : 2672
Thanks : 12901
Join date : 2012-09-06
Age : 33
Location : with admin

Firmware Update Steps For Samsung S5302 Empty
PostSubject: Firmware Update Steps For Samsung S5302   Firmware Update Steps For Samsung S5302 Icon_minitimeWed Jun 04, 2014 12:40 pm

Firmware Update Steps:

- Make sure that the phone's battery is fully charged, Then turn it off and take out the battery.

- Run Odin program and check these: Re-Partition ( If you have Pit file only ), Auto-Reboot, And F.Reset Time.

- If you have the Pit file of S5302 then Click PIT button and select it: coriDSemmc_0117.pit

- The selection of Firmware files is very easy so just follow these steps:

Click BOOTLOADER button and select: BOOT_S5302xxxxx_REV00.tar.md5

Click PDA button and select: PDA_S5302JPLH1_REV00.tar.md5

Click PHONE button and select: MODEM_S5302XXLH1_REV00.tar.md5

Click CSC button and select: GT-S5302-MULTI-CSC-Oxxxxx.tar.md5

- Download Mode of Galaxy Pocket Duos can be entered by pressing Download key + Home + Power key.

- Plug the USB cable into your PC and connect it to your phone, In case this it the first time you do that then windows will install the suitable drivers for it, Wait till the new device's drivers are installed and ready to use.

- Look at Odin program window to check if your phone has been detected correctly: you will notice that Odin defines the Com port number of the connected device 0:[COMxx] when xx is the com port number.

- Now you are ready to begin the update, So Click on Start button and let Odin do it for you.

- During this step do not remove USB cable from the phone or the computer otherwise the update will be interrupted, And that could harm your phone seriously.

- After it is done the phone will be rebooted automatically by Odin program and you will notice PASS! word on its window which means that everything is OK.

- Disconnect USB cable from your phone and at this point and wait it to be fully on.

- It is better to do Full reset to your phone using this Code: *2767*3855#.

- After you enter the above code the phone will be restarted so wait for it.

- When the phone is completely on you can start customizing it the way you like and enjoy the new Update.


Samsung S5302 Firmwares:
Android 2.3.6:
- S5302DDLJ2 / ODDLJ1 India 

- S5302DDMB1 / ODDLJ1 India
- S5302JPLH1 / OJPLG3 Arabic
- S5302JPLH2 / OJPLH1 KSA Saudi Arabia
- S5302JPLH2 / OJPLH1 XSG United Arab Emirates

- S5302JPLH2 / OJPMK2 Arabic

- S5302XXLH1 / OXELG1 SER Russia

- S5302XXLJ3 / OXFLJ1 COA Romania Cosmote

- S5302XXLJ3 / OXELG1 SER Russia

Back to top Go down

Firmware Update Steps For Samsung S5302

View previous topic View next topic Back to top 
Page 1 of 1

 Similar topics

» How To Hard Reset Galaxy Note 3
» Samsung S5302 flash with odin success
» Samsung C3262 Firmware Update Steps:
» Samsung USB Cable
» Firmware Update For Samsung S5830

Permissions in this forum:You cannot reply to topics in this forum
MobiTechnician :: GSM Mobile Phones :: Samsung :: Samsung Programs & Flashers-
Created by Service Team
Registered trademark of MobiTechnician Mobile Solutions